please use this product on the sunny day at 10:00 AM-3:00PM.Construction environment should be no dust.ventilated and dry,step1 to step 4 should be absence of direct sunlight.suggest cyclic operation,spray every headlight at first,then do the same spray at the second cycle.
1. polish: polish the surface of headlight by 2000#waterproof abrasive paper with spongy cushion wood,polish deeper at severely damaged place,the lamp must be polished to no luster.
2.cover:clean the lampshade with water ,when dry and coverthe lampshade around with masking film.
3.oil removingwax: remove :remover the wax,oil and stain with oil and wax removing wipes or degreaser, to ensure that the film is adhesive and smooth.
4.spray : please shake the can gently more than 45 seconds to make the liquid mix evenly .spray steadily at the distance or 15to 20cm,the first time thinly spray.wait for3-5min,then the second time thickly spray,wait for 3-5min. the third time thinly spray to adjust the thickness where spray too thin on the lampshade.until the lampshade is gloss,average and neatly.
5.Dry,wait for 3-5 min after spraying,expose it in the sun for more than 20 min.then this product can rapidly solidfy by absorbing uv rays